PE pipe PE pipe factory prices, PE100 water supply pipe PE water pipe hard plastic tap water pipe polyethylene pipes for water supply pipes (PE) GB/T 136632000hdpe PE (polyethylene) pipe material due to its high strength, corrosion resistance, nontoxic characteristics, is widely used in water supply pipe manufacturing field. Because it does not rust, therefore, is to replace the ordinary iron pipes of the ideal. The implementation of national standards of PE pipe products: GB/T 136632000 "polyethylene (PE) pipe".
Material: HDPE 
Nominal diameter: 20400 (mm) 
Nominal pressure: 0.321.6 (Mpa) 
Use: tap water pipe 
Manufacturer: Hebei Tangshan (origin) 
Wall thickness: 2.336.3 (mm) 
Color: black or white with blue. 
Length: 6912 (m) 
The continuous use of humidity: 045 (c) 
Polyethylene (PE) pipe PE water supply pipe is produced in accordance with the national standard GB/T136632000 to HDPE high density polyethylene as raw material, raw materials are PE63, PE80 and PE100 class three categories, the color of the pipe is black and blue or white with blue or black, general length 6m 8m, can be customized according to the length of customer requirements.
Specifications: 20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 315 355 400mm pipe
PE63 pipeline system
Material level: PE63
The implementation of the national standard: GB/T136632000
Pipe length: 6m 9m 12m
Color: black and blue or blue and white  and blue and blue coextrusion
PE63 class size specifications

The nominal wall thickness of E, mm  
Standard size ratio  
SDR33 
SDR26 
SDR17.6 
SDR13.6 
SDR11  
Nominal pressure PN, MPa  
Zero point three two 
Zero point four 
Zero point six 
Zero point eight 
One  
Sixteen 
Two point three  
Twenty 
2.3 
Two point three  
Twentyfive 
Two point three 
Two point three 
Two point three  
Thirtytwo 
Two point three 
Two point four 
Two point nine  
Forty 
Two point three 
Two point three 
Three 
Three point seven  
Fifty 
Two point three 
Two point nine 
Three point seven 
Four point six  
Sixtythree 
Two point three 
Two point five 
Three point six 
Four point seven 
Five point eight 
Seventyfive 
Two point three 
Two point nine 
Four point three 
Five point six 
Six point eight 
Ninety 
Two point eight 
Three point five 
Five point one 
Six point four 
Eight point two 
One hundred and ten 
Three point four 
Four point two 
Six point three 
Eight point one 
Ten 
One hundred and twentyfive 
Three point nine 
Four point eight 
Seven point one 
Nine point two 
Eleven point four 
One hundred and forty 
Four point three 
Five point four 
Eight 
Ten point three 
Twelve point seven 
One hundred and sixty 
Four point nine 
Six point two 
Nine point one 
Eleven point eight 
Fourteen point six 
One hundred and eighty 
Five point five 
Six point nine 
Ten point two 
Thirteen point three 
Sixteen point four 
Two hundred 
Six point two 
Seven point seven 
Eleven point four 
Fourteen point seven 
Eighteen point two 
Two hundred and twentyfive 
Six point nine 
Eight point six 
Twelve point eight 
Sixteen point six 
Twenty point five 
Two hundred and fifty 
Seven point seven 
Nine point six 
Fourteen point two 
Eighteen point four 
Twentytwo point seven 
Two hundred and eighty 
Eight point six 
Ten point seven 
Fifteen point nine 
Twenty point six 
Twentyfive point four 
Three hundred and fifteen 
Nine point seven 
Twelve point one 
Seventeen Point nine 
Twentythree point two 
Twentyeight point six 
Three hundred and fiftyfive 
Ten point nine 
Thirteen point six 
Twenty point one 
Thirtysix point one 
Thirtytwo point two 
Four hundred 
Twelve point three 
Fifteen point three 
Twentytwo point seven 
Twentynine point four 
Thirtysix point three 
Four hundred and fifty 
Thirteen point eight 
Seventeen Point Two 
Twentyfive point five 
Thirtythree point one 
Forty point nine 
Five hundred 
Fifteen point three 
Nineteen point one 
Twentyeight point three 
Thirtysix point eight 
Fortyfive point four 
Five hundred and sixty 
Seventeen Point Two 
Twentyone point four 
Thirtyone point seven 
Fortyone point two 
Fifty point eight 
Six hundred and thirty 
Nineteen point three 
Twentyfour point one 
Thirtyfive point seven 
Fortysix point three 
Fiftyseven point two 
PE80 pipeline system
Material level: PE80
Executive standard: GB/T136632000
Pipe length: 6m 9m 12m
Color: black and blue or blue and white  and blue and blue coextrusion
PE80 class size specifications

The nominal wall thickness of E, mm  
Standard size ratio  
SDR26 
SDR21 
SDR17 
SDR13.6 
SDR11  
Nominal pressure PN, MPa  
Zero point four 
Zero point six 
Zero point eight 
One 
One point two five  
Twenty 
Two point three 
Two point three  
Twentyfive 
Two 
Two point three 
Two point three  
Thirtytwo 
Two 
Two point four 
Three  
Forty 
Two 
Two point three 
Three 
Three point seven  
Fifty 
Two 
Two 
Two point eight 
Three point seven 
Four point six 
Sixtythree 
Two 
Two 
Three point six 
Four point seven 
Five point eight 
Seventyfive 
Two point three 
Three point six 
Four point five 
Five point six 
Six point eight 
Ninety 
Two point eight 
Four point three 
Five point four 
Six point seven 
Eight point two 
One hundred and ten 
Three point four 
Five point three 
Six point six 
Eight point one 
Ten 
One hundred and twentyfive 
Three point eight 
Six 
Seven point four 
Nine point two 
Eleven point four 
One hundred and forty 
Four point three 
Six point seven 
Eight point three 
Ten point three 
Twelve point seven 
One hundred and sixty 
Four point nine 
Seven point seven 
Nine point five 
Eleven point eight 
Fourteen point six 
One hundred and eighty 
Five point five 
Eight point six 
Ten point seven 
Thirteen point three 
Sixteen point four 
Two hundred 
Six point two 
Nine point six 
Eleven point nine 
Fourteen point seven 
Eighteen point two 
Two hundred and twentyfive 
Six point nine 
Ten point eight 
Thirteen point four 
Sixteen point six 
Twenty point five 
Two hundred and fifty 
Seven point seven 
Eleven point nine 
Fourteen point eight 
Eighteen point four 
Twentytwo point seven 
Three hundred and fifteen 
Nine point seven 
Fifteen 
Eighteen point seven 
Twentythree point two 
Twentyeight point six 
Three hundred and fiftyfive 
Ten point nine 
Sixteen point nine 
Twentyone point one 
Thirtysix point one 
Thirtytwo point two 
Four hundred 
Twelve point three 
Nineteen point one 
Twentythree point seven 
Twentynine point four 
Thirtysix point three 
Four hundred and fifty 
Thirteen point eight 
Twentyone point five 
Twentysix point seven 
Thirtythree point one 
Forty point nine 
Five hundred 
Fifteen point three 
Twentythree point nine 
Twentynine point seven 
Thirtysix point eight 
Fortyfive point four 
Five hundred and sixty 
Seventeen Point Two 
Twentysix point seven 
Thirtythree point two 
Fortyone point two 
Fifty point nine 
Six hundred and thirty 
Nineteen point three 
Thirty 
Thirtyseven point four 
Fortysix point three 
Fiftyseven point two 
PE100 pipeline system
Material level: PE100
Executive standard: GB/T136632000
Pipe length: 6m 9m 12m
Color: black and blue or blue and white  and blue and blue coextrusion
PE100 class size specifications

The nominal wall thickness of E, mm  
Standard size ratio  
SDR26 
SDR21 
SDR17 
SDR13.6 
SDR11  
Nominal pressure PN, MPa  
Zero point six 
Zero point eight 
One 
One point two five 
One point six  
Seventyfive 
Four point five 
Five point six 
Six point eight  
Ninety 
Four point three 
Five point four 
Six point seven 
Eight point two  
One hundred and ten 
Four point two 
Five point three 
Six point six 
Eight point one 
Ten 
One hundred and twentyfive 
Four point eight 
Six 
Seven point four 
Nine point two 
Eleven point four 
One hundred and forty 
Five point four 
Six point seven 
Eight point three 
Ten point three 
Twelve point seven 
One hundred and sixty 
Six point two 
Seven point seven 
Nine point five 
Eleven point eight 
Fourteen point six 
One hundred and eighty 
Six point nine 
Eight point six 
Ten point seven 
Thirteen point three 
Sixteen point four 
Two hundred 
Seven point seven 
Nine point six 
Eleven point nine 
Fourteen point seven 
Eighteen point two 
Two hundred and twentyfive 
Eight point six 
Ten point eight 
Thirteen point four 
Sixteen point six 
Twenty point five 
Two hundred and fifty 
Nine point six 
Eleven point nine 
Fourteen point eight 
Eighteen point four 
Twentytwo point seven 
Two hundred and eighty 
Ten point seven 
Thirteen point four 
Sixteen point six 
Twenty point six 
Twentyfive point four 
Three hundred and fifteen 
Twelve point one 
Fifteen 
Eighteen point seven 
Twentythree point two 
Twentyeight point six 
Three hundred and fiftyfive 
Thirteen point six 
Sixteen point nine 
Twentyone point one 
Thirtysix point one 
Thirtytwo point three 
Four hundred 
Fifteen point three 
Nineteen point one 
Twentythree point seven 
Twentynine point four 
Thirtysix point three 
Four hundred and fifty 
Seventeen Point Two 
Twentyone point five 
Twentysix point seven 
Thirtythree point one 
Forty point nine 
Five hundred 
Nineteen point one 
Twentythree point nine 
Twentynine point seven 
Thirtysix point eight 
Fortyfive point four 
Five hundred and sixty 
Twentyone point four 
Twentysix point seven 
Thirtythree point two 
Fortyone point two 
Fifty point eight 
Six hundred and thirty 
Twentyfour point one 
Thirty 
Thirtyseven point four 
Fortysix point three 
Fiftyseven point two 
Connection]:
And the same size HDPE pipe connection.
2063 uses hotmelt socket type connection.
63110 socket and docking can.
More than 110 of the butt welding of hot melt.
Hot melt connection method is a good method, the utility model has the advantages of low cost, good quality, no pipeline fittings etc.. Because there are to be equipped with welding equipment, hot melt interface operation is timeconsuming, the technical requirements of higher unfavorable factors.
The main steps of butt joint with:
First, prepare materials: flat pipes and fittings, placed on the docking machine, the cutting allowance for 1020mm.
Second, according to the clamping pipe welded slip selection fixture, suitable clamping pipe, ready for cutting.
Third, cutting: cutting the pipe section and pipe end impurity and oxide layer, ensure two butt end smooth and clean and no impurities.
Fourth, the two section: pipe end to completely on the wrong side, the smaller the better, the wrong side of the wall thickness of not more than 10%. Otherwise, will affect the quality of butt joint.
The heating, the average temperature in the docking between 210230 DEG C is appropriate, and don't have time heating board, with two 12mm in length for the end of melting.
6, switching: the heating plate away, quickly let the two hot melt end surface sticky and pressure, to ensure the quality of butt fusion, the switching period is as short as possible.
Sadly, the key is: melting butt welding, the docking process should always be at the melting pressure, roll edge width should be 24mm.
The cooling: keep the pressure constant for docking, interface with slow cooling, cooling time to touch the edge blunt, I feel hot prevail.
To complete the docking, cooling after Sunca Kauwa, remove the docking machine, to prepare for the next connection.
These are the main steps of hot melt connection, hot melt connection is all the connection requirement is high, when the connection should pay attention to the following questions:
Firstly, different materials, brand and wall thickness of pipes and fittings should not be mixed.
In the end, connections must be kept clean, to stick some water or dirt should be cleared up.
Third, the operator in the melt before the connection must go through rigorous training to posts.
Fourth, in hot melt connection before the maintenance, and operation of the equipment, it can guarantee the service life of the equipment.
The main steps of hot melt connection is inserted:
Tools: thermostat control drills
The welding device is installed and fixed end of the heating, the welding device placed on the shelf, according to the required heating die pipe specifications and installation corresponding to the inner six angle wrench, generally small in front.
Second, power on
Switch on the power (note that power must with the grounding wire), green light, red light goes out, said the welding device into automatic control, can start operation. Note:  in automatic temperature control, traffic lights will turn to light, indicating that the welding device in a controlled state, does not affect the operation.
Third, weld pipe
Vertical pipes are cut by cutting the tube, pipe and pipe fittings without rotating push welding device in the die, and press the table required to operate, heating time is reached immediately after the pipes and fittings from the die and removed quickly without rotating straight uniform inserted into the required depth, the joint formation of uniform flange.
Matters needing attention
1, the use must be handle with a grounding wire plug into the socket.
2, in use process, hand and inflammable materials can't touch the electric melting heat part, so as to avoid accidents.
3, non professionals are not allowed to open the safety performance of products, to prevent electric shock and damage instrument.
4, such as red light long time does not appear to jump, it shows that the instrument has been a failure, should immediately stop work, and cut off the power.
If you are outdoors, or in winter, should increase the heating time, and keep time. The general is the temperature of the hot melt machine set, don't change. If you want to change, according to the actual situation, gradually adjust.With a few times, a good experience.
Quality management system certification The authenticity of the query
Environmental management system certification The authenticity of the query
Occupation health and safety management system certification certificate of authenticity query
Hongyuan brand polyethylene PE pipe health permit
Hebei Province, health and safety of drinking water hygienic license
Xinhua watersaving product certification) with PE polyethylene pipes for water supply
Polyethylene PE pipe products certificate
Hebei Province agricultural watersaving irrigation and water supply in rural areas through the certification product announcement notice
Enterprise level certificate  Chinese irrigation water conservancy enterprise association of irrigation equipment branch company