<wbr id="nku5c"></wbr>

      1. <sub id="nku5c"><address id="nku5c"></address></sub>

        PE Water supply pipe GB/T 13663-2000

        Release time:2017-06-21  Browse times:192 times


        product details

        Polyethylene (PE) pipe GB/T 13663-2000hdpe pipe PE (polyethylene) material due to its high strength, corrosion resistance, non-toxic characteristics, is widely used in water supply pipe manufacturing field. Because it does not rust, therefore, is to replace the ordinary iron pipes of the ideal. The implementation of national standards of PE pipe products: GB/T 13663-2000 "polyethylene (PE) pipe".

        The scope of application:
        Applied to the urban and rural water supply, irrigation and agricultural water-saving irrigation pipe etc..
        Product features:
        1, long service life: under normal conditions, the minimum life of 50 years.
        2, good health: PE pipe non-toxic, does not contain heavy metal additives, no fouling, no bacterium, is to solve the problem of drinking water pollution two. Comply with the provisions of GB/T17219 safety evaluation standards and national Ministry of health related health and safety evaluation.
        3, can withstand a variety of chemical corrosion medium: no electrochemical corrosion.
        4, the inner wall is smooth, low friction coefficient, medium by a corresponding increase in the ability and has excellent abrasion resistance.
        5, good flexibility, high impact strength, resistance to strong and distortion.
        6, light weight, convenient transportation and installation.
        7, the unique welding connection and butt, hot melt socket connection technology makes the interface of high strength and the pipe body, to ensure the safe and reliable interface.
        8, the welding process is simple, convenient construction, low cost of project.
        9, PE water supply pipe for environmental health dn20~dn90 dn110 above is blue, blue or black with blue line, other colors can be customized, color and the color of the pipe corresponding accessories.
        10, small flow resistance: HDPE pipe has a smooth inner surface, the Manning coefficient of 0.009. Smooth performance and to ensure non adhesion properties of HDPE pipe has a higher than conventional transmission capacity pipe, but also reduce the pipeline pressure loss and water consumption.

        Material: HDPE

        Nominal diameter: 20-400 (mm)

        Nominal pressure: 0.32-1.6 (Mpa)

        Use: tap water pipe

        Manufacturer: Hebei Tangshan (origin)

        Wall thickness: 2.3-36.3 (mm)

        Color: black or white with blue.

        Length: 6912 (m)

        The continuous use of humidity: 0-45 (c)

        Polyethylene (PE) pipe PE water supply pipe is produced in accordance with the national standard GB/T13663-2000 to HDPE high density polyethylene as raw material, raw materials are PE63, PE80 and PE100 class three categories, the color of the pipe is black and blue or white with blue or black, general length 6m 8m, can be customized according to the length of customer requirements.
        Specifications: 20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 315 355 400mm pipe

        PE63 pipeline system

        Material level: PE63

        The implementation of the national standard: GB/T13663-2000

        Pipe length: 6m 9m 12m

        Color: black and blue or blue and white - and blue and blue coextrusion

        PE63 class size specifications



        nominal outside diameter
        DN, mm

        The nominal wall thickness of E, mm

        Standard size ratio

        SDR33

        SDR26

        SDR17.6

        SDR13.6

        SDR11

        Nominal pressure PN, MPa

        Zero point three two

        Zero point four

        Zero point six

        Zero point eight

        One

        Sixteen

        Two point three

        Twenty

        2.3

        Two point three

        Twenty-five

        Two point three

        Two point three

        Two point three

        Thirty-two

        Two point three

        Two point four

        Two point nine

        Forty

        Two point three

        Two point three

        Three

        Three point seven

        Fifty

        Two point three

        Two point nine

        Three point seven

        Four point six

        Sixty-three

        Two point three

        Two point five

        Three point six

        Four point seven

        Five point eight

        Seventy-five

        Two point three

        Two point nine

        Four point three

        Five point six

        Six point eight

        Ninety

        Two point eight

        Three point five

        Five point one

        Six point four

        Eight point two

        One hundred and ten

        Three point four

        Four point two

        Six point three

        Eight point one

        Ten

        One hundred and twenty-five

        Three point nine

        Four point eight

        Seven point one

        Nine point two

        Eleven point four

        One hundred and forty

        Four point three

        Five point four

        Eight

        Ten point three

        Twelve point seven

        One hundred and sixty

        Four point nine

        Six point two

        Nine point one

        Eleven point eight

        Fourteen point six

        One hundred and eighty

        Five point five

        Six point nine

        Ten point two

        Thirteen point three

        Sixteen point four

        Two hundred

        Six point two

        Seven point seven

        Eleven point four

        Fourteen point seven

        Eighteen point two

        Two hundred and twenty-five

        Six point nine

        Eight point six

        Twelve point eight

        Sixteen point six

        Twenty point five

        Two hundred and fifty

        Seven point seven

        Nine point six

        Fourteen point two

        Eighteen point four

        Twenty-two point seven

        Two hundred and eighty

        Eight point six

        Ten point seven

        Fifteen point nine

        Twenty point six

        Twenty-five point four

        Three hundred and fifteen

        Nine point seven

        Twelve point one

        Seventeen Point nine

        Twenty-three point two

        Twenty-eight point six

        Three hundred and fifty-five

        Ten point nine

        Thirteen point six

        Twenty point one

        Thirty-six point one

        Thirty-two point two

        Four hundred

        Twelve point three

        Fifteen point three

        Twenty-two point seven

        Twenty-nine point four

        Thirty-six point three

        Four hundred and fifty

        Thirteen point eight

        Seventeen Point Two

        Twenty-five point five

        Thirty-three point one

        Forty point nine

        Five hundred

        Fifteen point three

        Nineteen point one

        Twenty-eight point three

        Thirty-six point eight

        Forty-five point four

        Five hundred and sixty

        Seventeen Point Two

        Twenty-one point four

        Thirty-one point seven

        Forty-one point two

        Fifty point eight

        Six hundred and thirty

        Nineteen point three

        Twenty-four point one

        Thirty-five point seven

        Forty-six point three

        Fifty-seven point two

        PE80 pipeline system

        Material level: PE80

        Executive standard: GB/T13663-2000

        Pipe length: 6m 9m 12m

        Color: black and blue or blue and white - and blue and blue coextrusion

        PE80 class size specifications



        nominal outside diameter
        DN, mm

        The nominal wall thickness of E, mm

        Standard size ratio

        SDR26

        SDR21

        SDR17

        SDR13.6

        SDR11

        Nominal pressure PN, MPa

        Zero point four

        Zero point six

        Zero point eight

        One

        One point two five

        Twenty

        Two point three

        Two point three

        Twenty-five

        Two

        Two point three

        Two point three

        Thirty-two

        Two

        Two point four

        Three

        Forty

        Two

        Two point three

        Three

        Three point seven

        Fifty

        Two

        Two

        Two point eight

        Three point seven

        Four point six

        Sixty-three

        Two

        Two

        Three point six

        Four point seven

        Five point eight

        Seventy-five

        Two point three

        Three point six

        Four point five

        Five point six

        Six point eight

        Ninety

        Two point eight

        Four point three

        Five point four

        Six point seven

        Eight point two

        One hundred and ten

        Three point four

        Five point three

        Six point six

        Eight point one

        Ten

        One hundred and twenty-five

        Three point eight

        Six

        Seven point four

        Nine point two

        Eleven point four

        One hundred and forty

        Four point three

        Six point seven

        Eight point three

        Ten point three

        Twelve point seven

        One hundred and sixty

        Four point nine

        Seven point seven

        Nine point five

        Eleven point eight

        Fourteen point six

        One hundred and eighty

        Five point five

        Eight point six

        Ten point seven

        Thirteen point three

        Sixteen point four

        Two hundred

        Six point two

        Nine point six

        Eleven point nine

        Fourteen point seven

        Eighteen point two

        Two hundred and twenty-five

        Six point nine

        Ten point eight

        Thirteen point four

        Sixteen point six

        Twenty point five

        Two hundred and fifty

        Seven point seven

        Eleven point nine

        Fourteen point eight

        Eighteen point four

        Twenty-two point seven

        Three hundred and fifteen

        Nine point seven

        Fifteen

        Eighteen point seven

        Twenty-three point two

        Twenty-eight point six

        Three hundred and fifty-five

        Ten point nine

        Sixteen point nine

        Twenty-one point one

        Thirty-six point one

        Thirty-two point two

        Four hundred

        Twelve point three

        Nineteen point one

        Twenty-three point seven

        Twenty-nine point four

        Thirty-six point three

        Four hundred and fifty

        Thirteen point eight

        Twenty-one point five

        Twenty-six point seven

        Thirty-three point one

        Forty point nine

        Five hundred

        Fifteen point three

        Twenty-three point nine

        Twenty-nine point seven

        Thirty-six point eight

        Forty-five point four

        Five hundred and sixty

        Seventeen Point Two

        Twenty-six point seven

        Thirty-three point two

        Forty-one point two

        Fifty point nine

        Six hundred and thirty

        Nineteen point three

        Thirty

        Thirty-seven point four

        Forty-six point three

        Fifty-seven point two

        PE100 pipeline system

        Material level: PE100

        Executive standard: GB/T13663-2000

        Pipe length: 6m 9m 12m

        Color: black and blue or blue and white - and blue and blue coextrusion

        PE100 class size specifications


        nominal outside diameter
        DN, mm

        The nominal wall thickness of E, mm

        Standard size ratio

        SDR26

        SDR21

        SDR17

        SDR13.6

        SDR11

        Nominal pressure PN, MPa

        Zero point six

        Zero point eight

        One

        One point two five

        One point six

        Seventy-five

        Four point five

        Five point six

        Six point eight

        Ninety

        Four point three

        Five point four

        Six point seven

        Eight point two

        One hundred and ten

        Four point two

        Five point three

        Six point six

        Eight point one

        Ten

        One hundred and twenty-five

        Four point eight

        Six

        Seven point four

        Nine point two

        Eleven point four

        One hundred and forty

        Five point four

        Six point seven

        Eight point three

        Ten point three

        Twelve point seven

        One hundred and sixty

        Six point two

        Seven point seven

        Nine point five

        Eleven point eight

        Fourteen point six

        One hundred and eighty

        Six point nine

        Eight point six

        Ten point seven

        Thirteen point three

        Sixteen point four

        Two hundred

        Seven point seven

        Nine point six

        Eleven point nine

        Fourteen point seven

        Eighteen point two

        Two hundred and twenty-five

        Eight point six

        Ten point eight

        Thirteen point four

        Sixteen point six

        Twenty point five

        Two hundred and fifty

        Nine point six

        Eleven point nine

        Fourteen point eight

        Eighteen point four

        Twenty-two point seven

        Two hundred and eighty

        Ten point seven

        Thirteen point four

        Sixteen point six

        Twenty point six

        Twenty-five point four

        Three hundred and fifteen

        Twelve point one

        Fifteen

        Eighteen point seven

        Twenty-three point two

        Twenty-eight point six

        Three hundred and fifty-five

        Thirteen point six

        Sixteen point nine

        Twenty-one point one

        Thirty-six point one

        Thirty-two point three

        Four hundred

        Fifteen point three

        Nineteen point one

        Twenty-three point seven

        Twenty-nine point four

        Thirty-six point three

        Four hundred and fifty

        Seventeen Point Two

        Twenty-one point five

        Twenty-six point seven

        Thirty-three point one

        Forty point nine

        Five hundred

        Nineteen point one

        Twenty-three point nine

        Twenty-nine point seven

        Thirty-six point eight

        Forty-five point four

        Five hundred and sixty

        Twenty-one point four

        Twenty-six point seven

        Thirty-three point two

        Forty-one point two

        Fifty point eight

        Six hundred and thirty

        Twenty-four point one

        Thirty

        Thirty-seven point four

        Forty-six point three

        Fifty-seven point two

        Connection]:

        And the same size HDPE pipe connection.

        20-63 uses hot-melt socket type connection.

        63-110 socket and docking can.

        More than 110 of the butt welding of hot melt.

        Hot melt connection method is a good method, the utility model has the advantages of low cost, good quality, no pipeline fittings etc.. Because there are to be equipped with welding equipment, hot melt interface operation is time-consuming, the technical requirements of higher unfavorable factors.

        The main steps of butt joint with:
        First, prepare materials: flat pipes and fittings, placed on the docking machine, the cutting allowance for 10-20mm.
        Second, according to the clamping pipe welded slip selection fixture, suitable clamping pipe, ready for cutting.
        Third, cutting: cutting the pipe section and pipe end impurity and oxide layer, ensure two butt end smooth and clean and no impurities.
        Fourth, the two section: pipe end to completely on the wrong side, the smaller the better, the wrong side of the wall thickness of not more than 10%. Otherwise, will affect the quality of butt joint.
        The heating, the average temperature in the docking between 210-230 DEG C is appropriate, and don't have time heating board, with two 1-2mm in length for the end of melting.
        6, switching: the heating plate away, quickly let the two hot melt end surface sticky and pressure, to ensure the quality of butt fusion, the switching period is as short as possible.
        Sadly, the key is: melting butt welding, the docking process should always be at the melting pressure, roll edge width should be 2-4mm.
        The cooling: keep the pressure constant for docking, interface with slow cooling, cooling time to touch the edge blunt, I feel hot prevail.
        To complete the docking, cooling after Sunca Kauwa, remove the docking machine, to prepare for the next connection.
        These are the main steps of hot melt connection, hot melt connection is all the connection requirement is high, when the connection should pay attention to the following questions:
        Firstly, different materials, brand and wall thickness of pipes and fittings should not be mixed.
        In the end, connections must be kept clean, to stick some water or dirt should be cleared up.
        Third, the operator in the melt before the connection must go through rigorous training to posts.
        Fourth, in hot melt connection before the maintenance, and operation of the equipment, it can guarantee the service life of the equipment.

        The main steps of hot melt connection is inserted:

        Tools: thermostat control drills
        The welding device is installed and fixed end of the heating, the welding device placed on the shelf, according to the required heating die pipe specifications and installation corresponding to the inner six angle wrench, generally small in front.
        Second, power on
        Switch on the power (note that power must with the grounding wire), green light, red light goes out, said the welding device into automatic control, can start operation. Note: | in automatic temperature control, traffic lights will turn to light, indicating that the welding device in a controlled state, does not affect the operation.
        Third, weld pipe
        Vertical pipes are cut by cutting the tube, pipe and pipe fittings without rotating push welding device in the die, and press the table required to operate, heating time is reached immediately after the pipes and fittings from the die and removed quickly without rotating straight uniform inserted into the required depth, the joint formation of uniform flange.
        Matters needing attention
        1, the use must be handle with a grounding wire plug into the socket.
        2, in use process, hand and inflammable materials can't touch the electric melting heat part, so as to avoid accidents.
        3, non professionals are not allowed to open the safety performance of products, to prevent electric shock and damage instrument.
        4, such as red light long time does not appear to jump, it shows that the instrument has been a failure, should immediately stop work, and cut off the power.
        If you are outdoors, or in winter, should increase the heating time, and keep time. The general is the temperature of the hot melt machine set, don't change. If you want to change, according to the actual situation, gradually adjust.With a few times, a good experience.

        Product certificate

        A copy of the business license The authenticity of the query


        Quality management system certification The authenticity of the query

        Environmental management system certification The authenticity of the query

        Occupation health and safety management system certification certificate of authenticity query


        Hongyuan brand polyethylene PE pipe health permit
        Hebei Province, health and safety of drinking water hygienic license


        Xinhua water-saving product certification) with PE polyethylene pipes for water supply

        Polyethylene PE pipe products certificate

        Hebei Province agricultural water-saving irrigation and water supply in rural areas through the certification product announcement notice



        Enterprise level certificate - Chinese irrigation water conservancy enterprise association of irrigation equipment branch company

        Hebei Hongyuan Pipe Industry Group Co.,Ltd.
        Address: Fang Guantun village, GuShu Town,Yutian County, Tangshan, Hebei Province, China
        唐山網絡建設
        彩库宝典图库